MSNoise

msnoise@lists.observatory.be

349 discussions

by Thomas Lecocq

Hi all, I've identified a small bug in the new_jobs command. It's now corrected and the 1.3.1 version is updated at pypi, so simply "pip uninstall msnoise" and "pip install msnoise" to get the latest version. See the release notes below, Cheers, Thomas ---- This is a bugfix release. When running the new_jobs procedure, the jobs are "inserted" in the database, even if they already existed (they should be "updated"). This is because of the complete rewrite of the code to optimize the operation. As this optimization is mostly useful upon first run, I've added a parameter |--init| to the command. If provided, the "massive insert" procedure is used, if not, then the classic "insert or update if existing" is used. So, upon first run : |msnoise new_jobs --init| And afterwards (in cron, e.g.): `|msnoise new_jobs| Users who have already run MSNoise 1.3 on their archive need to clean the jobs table in the database. The buggy jobs are those "CC" jobs which are still marked "I"n progress after the compute_cc procedure, and with a "lastmod" = "NULL". They can be easily identified and removed. a classic SQL command would be: |DELETE from jobs WHERE lastmod is NULL; | | | -- Dr. Thomas Lecocq Geologist Seismology - Gravimetry Royal Observatory of Belgium * * * * * * * * * * --------- http://www.seismology.be http://twitter.com/#!/Seismologie_be

11 years

MSNoise 1.3 Released !!

by Thomas Lecocq

Hi all, 8 months after the last bugfix release (/MSNoise 1.2.5/ <http://www.msnoise.org/doc/releasenotes/msnoise-1.2.5.html>), and 17 months after the last major release (/MSNoise 1.2/ <http://www.msnoise.org/doc/releasenotes/msnoise-1.2.html>) we are proud to announce the new /MSNoise 1.3/ <http://www.msnoise.org/doc/releasenotes/msnoise-1.3.html>. It is a *major* release, with a massive amount of work since the last release: in GitHub numbers <https://github.com/ROBelgium/MSNoise/graphs/contributors?from=2014-06-28&to…> , it’s over 100 commits and about 3500 new lines of code and documentation added ! MSNoise 1.3 introduces a *brand new* way of executing the workflow. The workflow in itself doesn’t change, so experienced users as well as new users reading the SRL publication will find their way easily! *MSNoise is now a Python Package*, allowing a single (and easy) install for all your projects and/or all users using |pip install msnoise|. The new top-level |msnoise| command contains all the steps of the workflow, plus new additions, as the very useful |reset| command to easily mark all jobs “T”odo. The |msnoise plot| command group which includes seven plots, all directly callable from the command line, without needing to hack/edit the source codes. About hacking: MSNoise has now a proper documented API which allows pythonistas to write their own plots, computation steps, ..., while interacting with the database and the data archive! The “dynamic time lag” allows to use parts of the coda that is dependent from the interstation distance (provided station coordinates are defined). Finally, MSNoise is now /tested/ and automatically checked by Travis-CI! This version has benefited from outputs/ideas/pull requests/questions from several users: * Rebecca Kramer * Carmelo Sammarco * Oscar Alberto Castro Artola * Kasper van Wijk * Kohtaro R. Araragi * Esteban Chaves * Adrian Shelley * Weston Thelen * Robert Abbott * Jean Battaglia * Sébastien Carniato * Xiao Wang * Lion Krisher * Tobias Megies * all participants to the 2014 Pre-AGU MSNoise workshop * all others (don’t be mad :-) ) Thanks to all for using MSNoise, and please, let us know why/how you use it (and please cite it!)! Thomas -- Dr. Thomas Lecocq Geologist Seismology - Gravimetry Royal Observatory of Belgium * * * * * * * * * * --------- http://www.seismology.be http://twitter.com/#!/Seismologie_be

11 years, 1 month

Problems with s03compute_cc

by Rueda Nuñez Juán José

Dear all, I have a problem with the cross-correlation computation. The output for the program is: 2015-02-18 17:56:31,075 [INFO] Will compute ZZ 2015-02-18 17:56:31,306 [INFO] New CC Job: 2015-01-01 (4 pairs with 5 stations) 2015-02-18 17:56:31,408 [DEBUG] ES.CJUL.Z Reading 1 Files 2015-02-18 17:56:33,837 [DEBUG] ES.CJUL.Z Merging Stream 2015-02-18 17:56:33,839 [DEBUG] ES.CJUL.Z Slicing Stream to 2015-01-01T00:00:00.000000Z:2015-01-01T23:59:59.990000Z 2015-02-18 17:56:33,937 [DEBUG] ES.CJUL.Z Lowpass at 8.00 Hz 2015-02-18 17:56:38,981 [DEBUG] ES.CJUL.Z Highpass at 0.01 Hz 2015-02-18 17:56:39,705 [DEBUG] ES.CJUL.Z Decimate by a factor of 5 2015-02-18 17:56:39,758 [DEBUG] ES.CORC.Z Reading 1 Files 2015-02-18 17:56:42,276 [DEBUG] ES.CORC.Z Merging Stream 2015-02-18 17:56:42,277 [DEBUG] ES.CORC.Z Slicing Stream to 2015-01-01T00:00:00.000000Z:2015-01-01T23:59:59.990000Z 2015-02-18 17:56:42,277 [DEBUG] ES.CORC.Z Lowpass at 8.00 Hz 2015-02-18 17:56:42,924 [DEBUG] ES.CORC.Z Highpass at 0.01 Hz 2015-02-18 17:56:43,625 [DEBUG] ES.CORC.Z Decimate by a factor of 5 2015-02-18 17:56:43,670 [DEBUG] ES.CRST.Z Reading 1 Files 2015-02-18 17:56:46,168 [DEBUG] ES.CRST.Z Merging Stream 2015-02-18 17:56:46,168 [DEBUG] ES.CRST.Z Slicing Stream to 2015-01-01T00:00:00.000000Z:2015-01-01T23:59:59.990000Z 2015-02-18 17:56:46,169 [DEBUG] ES.CRST.Z Lowpass at 8.00 Hz 2015-02-18 17:56:46,817 [DEBUG] ES.CRST.Z Highpass at 0.01 Hz 2015-02-18 17:56:47,478 [DEBUG] ES.CRST.Z Decimate by a factor of 5 2015-02-18 17:56:47,525 [DEBUG] ES.CTAB.Z Reading 1 Files 2015-02-18 17:56:50,316 [DEBUG] ES.CTAB.Z Merging Stream 2015-02-18 17:56:50,443 [DEBUG] ES.CTAB.Z Slicing Stream to 2015-01-01T00:00:00.000000Z:2015-01-01T23:59:59.990000Z 2015-02-18 17:56:50,445 [DEBUG] ES.CTAB.Z Lowpass at 8.00 Hz 2015-02-18 17:56:51,115 [DEBUG] ES.CTAB.Z Highpass at 0.01 Hz 2015-02-18 17:56:51,775 [DEBUG] ES.CTAB.Z Decimate by a factor of 5 2015-02-18 17:56:51,815 [DEBUG] ES.CTIG.Z Reading 1 Files 2015-02-18 17:56:54,611 [DEBUG] ES.CTIG.Z Merging Stream 2015-02-18 17:56:55,737 [DEBUG] ES.CTIG.Z Slicing Stream to 2015-01-01T00:00:00.000000Z:2015-01-01T23:59:59.990000Z 2015-02-18 17:56:55,738 [DEBUG] ES.CTIG.Z Lowpass at 8.00 Hz 2015-02-18 17:56:56,403 [DEBUG] ES.CTIG.Z Highpass at 0.01 Hz 2015-02-18 17:56:57,074 [DEBUG] ES.CTIG.Z Decimate by a factor of 5 2015-02-18 17:56:57,113 [DEBUG] Processing pair: ES.CJUL vs ES.CTIG Traceback (most recent call last): File "s03compute_cc.py", line 402, in <module> trame2h[i]*cp, Nfft, dt, low, high, plot=False) File "/home/juan/MSNoise-1.2.5/whiten.py", line 58, in whiten low = J[0] - Napod IndexError: index 0 is out of bounds for axis 0 with size 0 Any solution? Thank you very much for your time. Juan Rueda Instituto Geográfico Nacional Spain

11 years, 1 month

Re: [MSNoise] Installation Challenges

by Thomas Lecocq

Hi Glenn, Did you try downloading the sources, edit/create a site.cfg file and run the python setup.py install ? It might work as-is ? Cheers tom Le 17/02/2015 20:40, Glenn Thompson a écrit : > I just tried installing the required packages on Red Hat Linux 6 too with > the same results as Adebayo. I was able to install libsamplerate (not > libsamplerate0): > > yum install libsamplerate > > But not libsamplerate-dev (or libsamplerate0-dev) > > And then the command: > > easy_install scikits.samplerate > > still failed with the same error as it did for Adebayo. > > error: SRC (http://www.mega-nerd.com/SRC/) library not found. Directories > to search > > for the libraries can be specified in the site.cfg file, in section > > [samplerate]. > > I have not been able to find out where on my system libsamplerate has > installed, so nothing to put in site.cfg. > > Have any users got MSNoise to work on a Red Hat or CentOs system? > > > > *********************************************************************************************** > Glenn Thompson > Research Assistant Professor Email: > thompsong(a)usf.edu > Volcano-Seismology Tel: > 813-974-3702 > School of Geosciences, USF Office: > SCA 214 > 4202 E Fowler Ave., NES107 Lab: SCA > 210 > Tampa, FL 33620 > *********************************************************************************************** > > On Mon, Feb 9, 2015 at 11:15 AM, Thomas Lecocq <thomas.lecocq(a)oma.be> wrote: > >> Hi, >> >> for the first part: you have to find the libsamplerate0 & -dev for your >> machine, I can't help on that, >> >> then, It's on the documentation: >> >> http://msnoise.org/doc/installation.html#samplerate >> >> Best regards, >> >> Thomas >> >> Le 09/02/2015 17:12, Adebayo Ojo a écrit : >>> Dear All, >>> >>> After much attempt to install the MSnoise software on my Centos 7 Linux >>> system, i feel i should ask for some guidance. >>> >>> [root@localhost ojo]# sudo yum install libsamplerate0 libsamplerate0-dev >>> Loaded plugins: fastestmirror, langpacks, priorities >>> Loading mirror speeds from cached hostfile >>> * base: centos.ustc.edu.cn >>> * epel: mirrors.ustc.edu.cn >>> * extras: centos.ustc.edu.cn >>> * rpmforge: mirror-fpt-telecom.fpt.net >>> * updates: centos.ustc.edu.cn >>> No package libsamplerate0 available. >>> No package libsamplerate0-dev available. >>> >>> >>> [root@localhost ojo]# easy_install scikits.samplerate >>> Searching for scikits.samplerate >>> Reading https://pypi.python.org/simple/scikits.samplerate/ >>> Best match: scikits.samplerate 0.3.3 >>> Downloading >>> >> https://pypi.python.org/packages/source/s/scikits.samplerate/scikits.sample… >>> Processing scikits.samplerate-0.3.3.tar.gz >>> Writing /tmp/easy_install-aF6CLy/scikits.samplerate-0.3.3/setup.cfg >>> Running scikits.samplerate-0.3.3/setup.py -q bdist_egg --dist-dir >>> /tmp/easy_install-aF6CLy/scikits.samplerate-0.3.3/egg-dist-tmp-L4szBy >>> error: SRC (http://www.mega-nerd.com/SRC/) library not found. >> Directories >>> to search >>> for the libraries can be specified in the site.cfg file, in section >>> [samplerate]. >>> >>> Kindly advice me. Thank you. >>> _______________________________________________ >>> MSNoise mailing list >>> MSNoise(a)mailman-as.oma.be >>> http://mailman-as.oma.be/mailman/listinfo/msnoise >> _______________________________________________ >> MSNoise mailing list >> MSNoise(a)mailman-as.oma.be >> http://mailman-as.oma.be/mailman/listinfo/msnoise >> > _______________________________________________ > MSNoise mailing list > MSNoise(a)mailman-as.oma.be > http://mailman-as.oma.be/mailman/listinfo/msnoise

11 years, 2 months

Cannot proceed to stacking as "Found 000 updated days"

by Dimitris Giannopoulos

Dear all, I have computed the daily cross-correlations between two stations but I cannot proceed to the stacking as "Found 000 updated days". I tried to continue with the stacking process immediately after the CC computations, so there was no need, for example, to give an interval to search for modified CC. Do I miss any detail about this issue? It is something that I did not face it before. Thank you very much in advance. Here are the last lines of the terminal: . . . GR.KALE..HHZ | 2010-12-22T00:00:00.000000Z - 2010-12-22T05:34:03.840000Z | 100.0 Hz, 2004385 samples GR.KALE..HHZ | 2010-12-22T05:34:24.450000Z - 2010-12-22T21:18:38.300000Z | 100.0 Hz, 5665386 samples GR.KALE..HHZ | 2010-12-22T21:18:46.555000Z - 2010-12-22T21:20:00.705000Z | 100.0 Hz, 7416 samples GR.KALE..HHZ | 2010-12-22T21:20:08.950000Z - 2010-12-22T23:59:59.990000Z | 100.0 Hz, 959105 samples 2015-02-17 14:37:57 [DEBUG] GR.KALE.Z Slicing Stream to 2010-12-22T00:00:00.000000Z:2010-12-22T23:59:59.990000Z 2015-02-17 14:37:57 [DEBUG] GR.KALE.Z Lowpass at 8.00 Hz 2015-02-17 14:37:58 [DEBUG] GR.KALE.Z Highpass at 0.01 Hz 2015-02-17 14:37:58 [DEBUG] GR.KALE.Z Downsample to 20.0 Hz 2015-02-17 14:37:59 [INFO] Pre-Whitening Traces 2015-02-17 14:37:59 [INFO] Processing CC 2015-02-17 14:38:00 [INFO] Job Finished. It took 11.23 seconds 2015-02-17 14:38:00 [INFO] *** Finished: Compute CC *** dimitris@dimitris-desktop:~/msnoise$ python s04stack.py -r -m 2015-02-17 14:39:42 [INFO] Starting this program with: ref=True, mov=True, interval=1 2015-02-17 14:39:42 [INFO] *** Starting: REF Stack *** 2015-02-17 14:39:42 [DEBUG] Starting the ref stack 2015-02-17 14:39:42 [DEBUG] Processing HA_KALE:HP_EFP-ZZ-1 2015-02-17 14:39:42 [DEBUG] Found 000 updated days 2015-02-17 14:39:42 [INFO] *** Finished: REF Stack *** 2015-02-17 14:39:42 [INFO] *** Starting: MOV Stack *** 2015-02-17 14:39:42 [DEBUG] Starting the mov stack 2015-02-17 14:39:42 [DEBUG] Processing HA_KALE:HP_EFP-ZZ-1 2015-02-17 14:39:42 [DEBUG] Found 000 updated days 2015-02-17 14:39:42 [INFO] *** Finished: MOV Stack *** >From dgiannopoulos(a)upatras.gr Tue Feb 17 14:52:30 2015 Return-Path: <dgiannopoulos(a)upatras.gr> X-Original-To: msnoise(a)mailman-as.oma.be Delivered-To: msnoise(a)mailman-as.oma.be Received: from nic.upatras.gr (nic.upatras.gr [150.140.129.30]) by mailman-as.oma.be (Postfix) with ESMTP id 3FFDE23619 for <msnoise(a)mailman-as.oma.be>; Tue, 17 Feb 2015 14:52:30 +0000 (UTC) Received: from localhost (nic.upatras.gr [127.0.0.1]) by nic.upatras.gr (Postfix) with ESMTP id AD211275885 for <msnoise(a)mailman-as.oma.be>; Tue, 17 Feb 2015 16:52:14 +0200 (EET) X-Virus-Scanned: amavisd-new at upatras.gr Received: from nic.upatras.gr ([127.0.0.1]) by localhost (nic.upatras.gr [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id U-T89lYzDQ2a for <msnoise(a)mailman-as.oma.be>; Tue, 17 Feb 2015 16:52:14 +0200 (EET) Received: from mail.upatras.gr (patreas.upatras.gr [150.140.129.29]) by nic.upatras.gr (Postfix) with ESMTP for <msnoise(a)mailman-as.oma.be>; Tue, 17 Feb 2015 16:52:14 +0200 (EET) Received: from mail1.upatras.gr (peacock.upnet.gr [150.140.129.41]) by mail.upatras.gr (Postfix) with ESMTP id EDA6E593E39 for <msnoise(a)mailman-as.oma.be>; Tue, 17 Feb 2015 16:52:11 +0200 (EET) MIME-Version: 1.0 Date: Tue, 17 Feb 2015 16:52:14 +0200 From: Dimitris Giannopoulos <dgiannopoulos(a)upatras.gr> To: msnoise(a)mailman-as.oma.be Organization: University of Patras, Department of Geology, Seismological Lab. In-Reply-To: <6b8bf2c1af693878345185e6c5df731b(a)upatras.gr> References: <6b8bf2c1af693878345185e6c5df731b(a)upatras.gr> Message-ID: <1ccaa8c3e7332f4d0f315b68df6a038f(a)upatras.gr> X-Sender: dgiannopoulos(a)upatras.gr User-Agent: Roundcube Webmail/1.0.4 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.12 Subject: [MSNoise] Cannot proceed to stacking as "Found 000 updated days" X-BeenThere: msnoise(a)mailman-as.oma.be X-Mailman-Version: 2.1.12 Precedence: list Reply-To: Python Package for Monitoring Seismic Velocity Changes using Ambient Seismic Noise <msnoise(a)mailman-as.oma.be> List-Id: Python Package for Monitoring Seismic Velocity Changes using Ambient Seismic Noise <msnoise.mailman-as.oma.be> List-Unsubscribe: <http://mailman-as.oma.be/mailman/options/msnoise>, <mailto:msnoise-request@mailman-as.oma.be?subject=unsubscribe> List-Archive: <http://mailman-as.oma.be/pipermail/msnoise/> List-Post: <mailto:msnoise@mailman-as.oma.be> List-Help: <mailto:msnoise-request@mailman-as.oma.be?subject=help> List-Subscribe: <http://mailman-as.oma.be/mailman/listinfo/msnoise>, <mailto:msnoise-request@mailman-as.oma.be?subject=subscribe> X-List-Received-Date: Tue, 17 Feb 2015 14:52:30 -0000 I found out what the problem was. It was my fault. There was a mismatch between the names of CC jobs in the database (GR.KALE:GR.EFP) and those that the software was expected to find (HA.KALE:HP.EFP) because of the existence of different network codes. > Dear all, > > I have computed the daily cross-correlations between two stations but I cannot proceed to the stacking as "Found 000 updated days". > I tried to continue with the stacking process immediately after the CC computations, so there was no need, for example, to give an interval to search for modified CC. > Do I miss any detail about this issue? It is something that I did not face it before. > Thank you very much in advance. > > Here are the last lines of the terminal: > > . > . > . > GR.KALE..HHZ | 2010-12-22T00:00:00.000000Z - 2010-12-22T05:34:03.840000Z | 100.0 Hz, 2004385 samples > GR.KALE..HHZ | 2010-12-22T05:34:24.450000Z - 2010-12-22T21:18:38.300000Z | 100.0 Hz, 5665386 samples > GR.KALE..HHZ | 2010-12-22T21:18:46.555000Z - 2010-12-22T21:20:00.705000Z | 100.0 Hz, 7416 samples > GR.KALE..HHZ | 2010-12-22T21:20:08.950000Z - 2010-12-22T23:59:59.990000Z | 100.0 Hz, 959105 samples > 2015-02-17 14:37:57 [DEBUG] GR.KALE.Z Slicing Stream to 2010-12-22T00:00:00.000000Z:2010-12-22T23:59:59.990000Z > 2015-02-17 14:37:57 [DEBUG] GR.KALE.Z Lowpass at 8.00 Hz > 2015-02-17 14:37:58 [DEBUG] GR.KALE.Z Highpass at 0.01 Hz > 2015-02-17 14:37:58 [DEBUG] GR.KALE.Z Downsample to 20.0 Hz > 2015-02-17 14:37:59 [INFO] Pre-Whitening Traces > 2015-02-17 14:37:59 [INFO] Processing CC > 2015-02-17 14:38:00 [INFO] Job Finished. It took 11.23 seconds > 2015-02-17 14:38:00 [INFO] *** Finished: Compute CC *** > dimitris@dimitris-desktop:~/msnoise$ python s04stack.py -r -m > 2015-02-17 14:39:42 [INFO] Starting this program with: ref=True, mov=True, interval=1 > 2015-02-17 14:39:42 [INFO] *** Starting: REF Stack *** > 2015-02-17 14:39:42 [DEBUG] Starting the ref stack > 2015-02-17 14:39:42 [DEBUG] Processing HA_KALE:HP_EFP-ZZ-1 > 2015-02-17 14:39:42 [DEBUG] Found 000 updated days > 2015-02-17 14:39:42 [INFO] *** Finished: REF Stack *** > 2015-02-17 14:39:42 [INFO] *** Starting: MOV Stack *** > 2015-02-17 14:39:42 [DEBUG] Starting the mov stack > 2015-02-17 14:39:42 [DEBUG] Processing HA_KALE:HP_EFP-ZZ-1 > 2015-02-17 14:39:42 [DEBUG] Found 000 updated days > 2015-02-17 14:39:42 [INFO] *** Finished: MOV Stack *** >From thompsong(a)mail.usf.edu Tue Feb 17 19:41:11 2015 Return-Path: <thompsong(a)mail.usf.edu> X-Original-To: msnoise(a)mailman-as.oma.be Delivered-To: msnoise(a)mailman-as.oma.be Received: from mail-qg0-f43.google.com (mail-qg0-f43.google.com [209.85.192.43]) by mailman-as.oma.be (Postfix) with ESMTP id AF79923657 for <msnoise(a)mailman-as.oma.be>; Tue, 17 Feb 2015 19:41:11 +0000 (UTC) Received: by mail-qg0-f43.google.com with SMTP id i50so29641785qgf.2 for <msnoise(a)mailman-as.oma.be>; Tue, 17 Feb 2015 11:40:55 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mail.usf.edu; s=googleapps; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type; bh=BLre+DohkGaDHp3r0qGg4Uqb1o6A9jXdqKHXubDsWlY=; b=OmXejfo0EXn8MBsplVNuz6rPH531H1Zj4C1iUKWp9PAjXrwbeJTzR9WG6OJMlltd6Q RMmbZw8ZpcS/6hcURQ2od6XQy0pSUDexSI3SF9qQyG0CH4urPkQIh1tpEX4X1LolJUda A5vv4UU+3c/SmXve45iScuPZpwMBYosiQZWSo= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:mime-version:in-reply-to:references:date :message-id:subject:from:to:content-type; bh=BLre+DohkGaDHp3r0qGg4Uqb1o6A9jXdqKHXubDsWlY=; b=LafqInDfLRcrz/ugRaRl8MzCy777kOL/AD/CvvebLBdNFPyKDWv43j6va7aGnx0mV8 NY6gAgWru8jTg+Snk8CmDTCG4olwQjAAjhFDHe3xuJhx3G8/6+OBypKC311uHOEnLIRA p/rQSxG632dHfCOVnnEYNqGTLqG9J0Iqdt+HPLHKMyCqSj5OjIJIizDGe+7PMMMuUS6z 0M7W6XK810NcRsc2qiMrTLytvtqFkO98yW1AeqgtYgjE8HkX9YcUqgM/vsSSwvRnhZtZ M1+OKB67Bz0E84gCxzjkJHBxM07zIUXbRLPXl35RE93sMkk8ikX2+0raFVYZEXIIqvii ad8g== X-Gm-Message-State: ALoCoQkIBamwbly9Rtowc2Zm2D2jCzn0Kh3+ajE6WeKth4ZJpuhAb12zKqc02wn9a80jZ5r6snn8 MIME-Version: 1.0 X-Received: by 10.140.217.200 with SMTP id n191mr1184099qhb.29.1424202055139; Tue, 17 Feb 2015 11:40:55 -0800 (PST) Received: by 10.140.106.182 with HTTP; Tue, 17 Feb 2015 11:40:55 -0800 (PST) In-Reply-To: <1e808d4fa53a43798dbfe236265e1fdb(a)SN2PR0801MB623.namprd08.prod.outlook.com> References: <CAJskVP=XYyRO1G6uuxdEVSS+LVGg3X-8psAhp-+CS6nyALA3jw(a)mail.gmail.com> <1e808d4fa53a43798dbfe236265e1fdb(a)SN2PR0801MB623.namprd08.prod.outlook.com> Date: Tue, 17 Feb 2015 14:40:55 -0500 Message-ID: <CAHEx3ayExp0jn9i3QXKBw6iAuo_NtT1g3_R11p8KLNSnOBA=Lw(a)mail.gmail.com> From: Glenn Thompson <thompsong(a)mail.usf.edu> To: Python Package for Monitoring Seismic Velocity Changes using Ambient Seismic Noise <msnoise(a)mailman-as.oma.be> X-Mailman-Approved-At: Tue, 17 Feb 2015 21:31:12 +0000 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.12 Subject: Re: [MSNoise] Installation Challenges X-BeenThere: msnoise(a)mailman-as.oma.be X-Mailman-Version: 2.1.12 Precedence: list Reply-To: Python Package for Monitoring Seismic Velocity Changes using Ambient Seismic Noise <msnoise(a)mailman-as.oma.be> List-Id: Python Package for Monitoring Seismic Velocity Changes using Ambient Seismic Noise <msnoise.mailman-as.oma.be> List-Unsubscribe: <http://mailman-as.oma.be/mailman/options/msnoise>, <mailto:msnoise-request@mailman-as.oma.be?subject=unsubscribe> List-Archive: <http://mailman-as.oma.be/pipermail/msnoise/> List-Post: <mailto:msnoise@mailman-as.oma.be> List-Help: <mailto:msnoise-request@mailman-as.oma.be?subject=help> List-Subscribe: <http://mailman-as.oma.be/mailman/listinfo/msnoise>, <mailto:msnoise-request@mailman-as.oma.be?subject=subscribe> X-List-Received-Date: Tue, 17 Feb 2015 19:41:12 -0000 I just tried installing the required packages on Red Hat Linux 6 too with the same results as Adebayo. I was able to install libsamplerate (not libsamplerate0): yum install libsamplerate But not libsamplerate-dev (or libsamplerate0-dev) And then the command: easy_install scikits.samplerate still failed with the same error as it did for Adebayo. error: SRC (http://www.mega-nerd.com/SRC/) library not found. Directories to search for the libraries can be specified in the site.cfg file, in section [samplerate]. I have not been able to find out where on my system libsamplerate has installed, so nothing to put in site.cfg. Have any users got MSNoise to work on a Red Hat or CentOs system? ***************************************************************************= ******************** Glenn Thompson Research Assistant Professor Email: thompsong(a)usf.edu Volcano-Seismology Tel: 813-974-3702 School of Geosciences, USF Office: SCA 214 4202 E Fowler Ave., NES107 Lab: SCA 210 Tampa, FL 33620 ***************************************************************************= ******************** On Mon, Feb 9, 2015 at 11:15 AM, Thomas Lecocq <thomas.lecocq(a)oma.be> wrote= : > Hi, > > for the first part: you have to find the libsamplerate0 & -dev for your > machine, I can't help on that, > > then, It's on the documentation: > > http://msnoise.org/doc/installation.html#samplerate > > Best regards, > > Thomas > > Le 09/02/2015 17:12, Adebayo Ojo a =C3=A9crit : > > Dear All, > > > > After much attempt to install the MSnoise software on my Centos 7 Linux > > system, i feel i should ask for some guidance. > > > > [root@localhost ojo]# sudo yum install libsamplerate0 libsamplerate0-de= v > > Loaded plugins: fastestmirror, langpacks, priorities > > Loading mirror speeds from cached hostfile > > * base: centos.ustc.edu.cn > > * epel: mirrors.ustc.edu.cn > > * extras: centos.ustc.edu.cn > > * rpmforge: mirror-fpt-telecom.fpt.net > > * updates: centos.ustc.edu.cn > > No package libsamplerate0 available. > > No package libsamplerate0-dev available. > > > > > > [root@localhost ojo]# easy_install scikits.samplerate > > Searching for scikits.samplerate > > Reading https://pypi.python.org/simple/scikits.samplerate/ > > Best match: scikits.samplerate 0.3.3 > > Downloading > > > https://pypi.python.org/packages/source/s/scikits.samplerate/scikits.samp= lerate-0.3.3.tar.gz#md5=3D96c8d8ba3aa95a9db15994f78792efb4 > > Processing scikits.samplerate-0.3.3.tar.gz > > Writing /tmp/easy_install-aF6CLy/scikits.samplerate-0.3.3/setup.cfg > > Running scikits.samplerate-0.3.3/setup.py -q bdist_egg --dist-dir > > /tmp/easy_install-aF6CLy/scikits.samplerate-0.3.3/egg-dist-tmp-L4szBy > > error: SRC (http://www.mega-nerd.com/SRC/) library not found. > Directories > > to search > > for the libraries can be specified in the site.cfg file, in section > > [samplerate]. > > > > Kindly advice me. Thank you. > > _______________________________________________ > > MSNoise mailing list > > MSNoise(a)mailman-as.oma.be > > http://mailman-as.oma.be/mailman/listinfo/msnoise > > _______________________________________________ > MSNoise mailing list > MSNoise(a)mailman-as.oma.be > http://mailman-as.oma.be/mailman/listinfo/msnoise >

11 years, 2 months

Re: [MSNoise] Problems with folders creates with s03computecc.py

by Fernando Salazar Monroy

Hello Thomas, I've defined 2 filters in the configuration; keep_all and keep_days are with the opcion 'Y', however the folders aren't create. Best regards, Edilson Fernando Salazar Monroy Master in Earth Sciences at UNAM

11 years, 2 months

Problems with folders creates with s03computecc.py

by Fernando Salazar Monroy

Hello all, I have been trying of to estimate the cross correlations in the last version of MSNOISE for a period of time, and when I run this code nothing appeared into the folder, however in terminal the process was running: 2015-02-14 14:48:58,560 [DEBUG] IG.ZIIG.Z Slicing Stream to 2009-01-04T00:00:00.000000Z:2009-01-04T23:59:59.800000Z 2015-02-14 14:48:58,561 [DEBUG] IG.ZIIG.Z Lowpass at 1.00 Hz 2015-02-14 14:48:58,592 [DEBUG] IG.ZIIG.Z Highpass at 0.01 Hz 2015-02-14 14:48:58,628 [DEBUG] IG.ZIIG.Z Downsample to 20.0 Hz 2015-02-14 14:48:59,046 [DEBUG] Y9.TOMA3.Z Reading 1 Files 2015-02-14 14:48:59,058 [DEBUG] Y9.TOMA3.Z Merging Stream 2015-02-14 14:48:59,059 [DEBUG] Y9.TOMA3.Z Slicing Stream to 2009-01-04T00:00:00.000000Z:2009-01-04T23:59:59.800000Z 2015-02-14 14:48:59,063 [DEBUG] Y9.TOMA3.Z Lowpass at 1.00 Hz 2015-02-14 14:48:59,232 [DEBUG] Y9.TOMA3.Z Highpass at 0.01 Hz 2015-02-14 14:48:59,467 [DEBUG] Y9.TOMA3.Z Downsample to 20.0 Hz 2015-02-14 14:48:59,896 [DEBUG] Processing pair: IG.CAIG vs IG.ZIIG /media/fernando/Seagate Expansion Drive/MSNOISE/GGAP_SSN/myCorr.py:68: RuntimeWarning: invalid value encountered in divide corr /= np.real(normFact) 2015-02-14 14:49:00,626 [DEBUG] Updating Job 2015-02-14 14:49:00,675 [DEBUG] Finished processing this pair. It took 0.78 seconds 2015-02-14 14:49:00,675 [DEBUG] Processing pair: IG.MEIG vs IG.ZIIG 2015-02-14 14:49:01,392 [DEBUG] Updating Job 2015-02-14 14:49:01,443 [DEBUG] Finished processing this pair. It took 0.77 seconds 2015-02-14 14:49:01,444 [DEBUG] Processing pair: IG.PLIG vs IG.ZIIG 2015-02-14 14:49:02,118 [DEBUG] Updating Job 2015-02-14 14:49:02,163 [DEBUG] Finished processing this pair. It took 0.72 seconds 2015-02-14 14:49:02,164 [DEBUG] Processing pair: IG.PNIG vs IG.ZIIG 2015-02-14 14:49:02,881 [DEBUG] Updating Job 2015-02-14 14:49:02,931 [DEBUG] Finished processing this pair. It took 0.77 seconds 2015-02-14 14:49:02,932 [DEBUG] Processing pair: IG.YAIG vs IG.ZIIG 2015-02-14 14:49:03,479 [DEBUG] Updating Job Later I saw that CROSS_CORRELATIONS and STACK folder weren't create. Before I remember that 2 folders were create at the same time. Into the code has a parameter for this?. Somebody knows the cause of this? Greetings Edilson Fernando Salazar Monroy Master in Earth Sciences at UNAM

11 years, 2 months

Fwd: Uncaught bounce notification

by Thomas Lecocq

Fernando, please resend your message to the mailing list, not to the bounce manager (and change it in your mail client) ! MSNoise <msnoise(a)mailman-as.oma.be> Thanks ! Thomas -------- Message transféré -------- Sujet : Uncaught bounce notification Date : Sat, 14 Feb 2015 21:30:18 +0000 De : mailman-bounces(a)mailman-as.oma.be Pour : msnoise-owner(a)mailman-as.oma.be The attached message was received as a bounce, but either the bounce format was not recognized, or no member addresses could be extracted from it. This mailing list has been configured to send all unrecognized bounce messages to the list administrator(s). For more information see: http://mailman-as.oma.be/mailman/admin/msnoise/bounce

11 years, 2 months

QUESTIONS ABOUT ALL PROCESS WITH MSNOISE

by Fernando Salazar Monroy

Hello Thomas, I'm trying again run msnoise in my computer, however I want to do some questions about the processing. I have all records in SAC format, and I have processed these with the next specifications: The sampling rate for the correlations is 1 sps startdate : 2009-01-01 enddate : 2013-01-01 analysis duration : 86400 cc_sampling_rate : 20 resampling_method : Decimate decimation_factor : 125 preprocess_lowpass : 1 preprocess_highpass : 0.0125 maxlag : 120 corr_duration : 1800 windsorizing : 3 crondays : -1 autocorr : N keep_all : Y keep_days : Y ref_begin :2009-01-01 ref_end : 2013-01-01 export_format : MSEED sac_format : doublets I don't know why, but the mwcs.py don't stimate and s06compute_dtt.py the compiler don't function. One of the filter for the correlations is: correlations is low=0.1, low_mwcs=0.1, high_mwcs=0.2, high=0.2 Someone could tell me if some parameter is wrong? Edilson Salazar Master in Earth Sciences National Autonomus University of Mexico

11 years, 2 months

Autocorrelations in MSNoise

by Aurélien Mordret

Hi Thomas, What is the pre-processing of the noise when computing autocorrelations? Is it the same as for the cross-correlations? If yes, would it be better to not fully whiten the data before autocorrelation as the only information comes from the amplitude spectrum (and not the phase)? I suggest to modify a bit the whiten.py function to keep the structure of the whole code similar. Following Gorbatov et al. (2013), instead of putting the amplitude spectrum =1 (with tapper) I would use a normalisation with a water-level in the form A(freq) = A(freq)/max(A(freq),c*max(A(freq))) With A the amplitude spectrum and c the water-level factor (which is typically on the order of 1%). It should not change the results for the cross-correlations and improve the autocorrelations. Does it make sense or did I missed something? Cheers, Aurelien REF: Gorbatov, A., Saygin, E., & Kennett, B. L. N. (2013). Crustal properties from seismic station autocorrelograms. *Geophysical Journal International*, *192*(2), 861-870. -- ========================== Postdoctoral fellow Department of Earth, Atmospheric and Planetary Sciences Massachusetts Institute of Technology 54-526 Cambridge, MA 02139-4307 e-mail: mordret(a)mit.edu web: http://web.mit.edu/mordret/www

11 years, 2 months

← Newer
1
...
23
24
25
26
27
28
29
...
35
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

MSNoise